For a warehouse, auto shop, distribution center or fire station, an overhead door isn’t a convenience. It’s how the work gets in and out. When a door jams halfway open or won’t close at the end of the day, shipments stall, crews wait, heating and cooling pour out, and the building may not be secure overnight.
Commercial doors also live a much harder life than residential ones. They’re bigger and heavier, they may cycle dozens or even hundreds of times a day, and they take the occasional bump from a forklift or truck.
The businesses that rarely deal with door emergencies usually have one thing in common: they treat their doors like any other piece of critical equipment. Here’s how to do the same.
Why Commercial Doors Wear Out Faster
Cycle count. A home garage door might open and close a few times a day. A busy loading dock or service bay door can do that many cycles in an hour. Springs, cables, rollers and operators are all rated for a certain number of cycles, and high-traffic doors burn through them quickly.
Size and weight. Larger commercial sectional and rolling steel doors put much heavier loads on their springs, shafts and operators.
Impacts. Forklifts, pallet jacks and trucks backing into a dock are some of the most common causes of commercial door damage. Even a minor bump can bend a track or panel enough to throw the whole door out of alignment.
Environment. Dust, temperature swings, road salt, washdowns and constant exposure to the weather all speed up wear on seals, hardware and electronics.
Many people using it. When dozens of employees and drivers operate the same door, small problems tend to go unreported until the door finally stops.
Build a Preventive Maintenance Program
The most effective way to prevent door emergencies is a scheduled preventive maintenance (PM) program with a qualified door company. How often depends on use:
| Door use | Suggested service interval |
| Light (a few cycles a day) | Once or twice a year |
| Moderate (dozens of cycles a day) | Quarterly |
| Heavy (high-traffic docks, service bays) | Monthly to quarterly |
A thorough PM visit should include:
- Inspecting and adjusting springs, cables, drums and shafts
- Checking rollers, hinges, tracks and fasteners for wear and alignment
- Lubricating moving parts appropriate to the door type
- Testing the operator’s limits, force settings and controls
- Testing all safety devices, including photo eyes and reversing edges
- Inspecting seals, weatherstripping and dock seals
- A written report on the condition of each door, with priorities for repairs
That written report is valuable on its own. It gives you a record for budgeting, insurance and safety compliance, and helps you plan replacements instead of being surprised by them.
Make Your Staff Part of the Plan
The people who use your doors every day are your best early-warning system. A few simple habits go a long way:
- Report problems right away. Make it easy for employees to flag a door that’s noisy, slow, jerky or reversing unexpectedly, and make sure someone follows up.
- Keep the opening clear. Pallets, trash and equipment left in the door’s path can trigger safety devices or get struck by a closing door.
- Never ride or walk under a moving door, and never use the door to stop a truck or load.
- Don’t bypass safety devices. Taping over photo eyes or holding the close button to override a reversing edge creates serious risk to people and equipment.
- Train forklift drivers on door clearance, and wait until the door is fully open before driving through.
- Do a quick visual check at the start of each shift on high-use doors: look for damaged panels, slack cables and debris in the tracks.
If a door is damaged or struck, stop using it until it’s inspected. A door that’s been knocked out of alignment can come off its tracks or fall.
Repair, Upgrade or Replace?
Most commercial door problems can be repaired: a broken spring, a damaged panel or section, a bent track, a failed operator board. But replacement or an upgrade starts to make sense when:
- The same door keeps breaking down, and repair costs are adding up
- Parts for an older door or operator are hard to find
- The door no longer fits how the space is used, such as a door that’s too slow for current traffic
- Energy loss through an uninsulated or poorly sealed door is driving up heating and cooling costs
Upgrades worth asking about:
- High-cycle springs, which last much longer on busy doors and cut down on emergency calls
- Heavy-duty or high-performance doors for openings that see constant traffic or frequent impacts
- Insulated doors and better dock seals to keep conditioned air inside
- Modern operators with better safety features, smoother starts and stops, and remote monitoring
- Impact protection such as bollards and track guards in areas where forklifts operate
A good door partner will help you weigh the cost of a repair against the downtime and future repairs it may not prevent.
Choosing the Right Commercial Door Partner
The best time to find a door company is before you need one at 6 a.m. with a truck waiting. Look for a provider that specializes in commercial doors, operators and dock equipment, offers 24/7 emergency service and preventive maintenance programs, and is licensed, insured and accredited by an industry association.
A commercial door company that knows your building, your doors and how you use them can spot problems early, keep parts on hand and get you running quickly when something does go wrong.
Your doors open and close all day so your business can keep moving. A little planning keeps it that way.
About the Author
This article was written by the team at Merchantville Overhead Door, a family-owned garage door company serving Southern New Jersey and the Greater Philadelphia region since 1936. Now in its fourth generation, the company repairs and installs residential garage doors and commercial overhead doors, and was the first accredited door dealer in New Jersey.